For high-speed fin punch maintenance needs to do these

We are a professional manufacturer of high-speed fin punch processing. In order to ensure the stable working state and efficiency of high-speed fin punch, it is necessary to maintain it.

What do we need to do for the maintenance of high speed fin punch?

1： Site selection

Avoid direct sunlight and other thermal radiation, avoid places with too much moisture or dust, and try to use them in air-conditioned environment, and keep the room temperature about 20 ℃. Due to the temperate climate in China, affected by monsoon and great temperature difference, CNC machine tools with high precision and high price should be used in air-conditioned rooms. Avoid places with corrosive gases. Because of corrosive gas, electronic components are easy to deteriorate, or cause poor contact, or cause short circuit of components, affecting the normal operation of the machine tool.

2、 Configure the appropriate automatic programming system

Manual programming is simple and easy for parts whose shape is not too complex or the amount of programming is not large. When the workpiece is complex (such as cam or multi-dimensional space surface, etc.), manual programming cycle is long (days or weeks), precision is poor and error prone. Therefore, rapid and accurate programming has become an important link to improve the utilization rate of CNC machine tools; therefore, users with conditions can better configure the necessary automatic programming system to improve the programming efficiency.

3、 Configure necessary accessories and tools

In order to give full play to the processing capacity of high-speed punch, necessary accessories and cutting tools must be equipped. Do not spend hundreds of thousands of yuan to buy a high-speed punch, because the lack of a few tens of dollars or hundreds of yuan accessories or tools and affect the normal operation of the machine. As the unit price of accessories purchased under a separate contract is much higher than that of accessories supplied with the main engine, enterprises with conditions shall purchase vulnerable parts and other accessories at the same time as far as possible.

4、 Make necessary preparation before processing

Before processing, it is necessary to review the NC machining process of the workpiece, and pay attention to the preparation of production technology (including NC machining process analysis, processing programming, tooling and tool configuration, raw material preparation and trial cutting processing, etc.) to shorten the production preparation time and fully improve the use efficiency of high-speed punch. Reasonable arrangement of all kinds of work pieces suitable for high-speed punch processing, arrange the beat required by high-speed punch processing.