1. The calculated pressure of bending machine is calculated according to the tensile strength of the plate. If you are not the same board performance, although the calculation is the same, but the actual force required is not the same.
2. If the external factors are the same, Nantong fin punch manufacturer is only the problem of bending machine, which can be adjusted in two places: one is to adjust the tensile strength of the inner plate of the system; the other is to adjust the Da value in the system setting. Because I don't know what system you are using, it's hard to tell you the specific method.
However, this problem may not be completely abnormal. Long term overload work, unstable external power supply, or increased friction of machine parts may lead to this phenomenon. Pay attention to more maintenance!
1. Direct angle programming with angle compensation function.
2. The positioning accuracy of grating ruler is ± 0.02mm.
3. The upper die adopts fast clamping device, and the lower die adopts wedge deformation compensation mechanism.
4. With the function of multi-step programming, it can realize multiple automatic operation, complete the one-time processing of multi-step parts, and improve the production efficiency.
5. According to the needs of users, the imported hydraulic system with stable performance and compact structure can be selected, and the ball screw and synchronous belt transmission can be selected for the rear stopper.
|Address: Hai'an National Development Zone, Nantong, Jiangsu Province|
Scan and pay attention to us